The idea that time flies when you’re having fun could not be more true. In fact, it’s been so much fun and I’ve been so focused on my projects (“in the zone” as I like to say), that I only just realized the other day that’s it’s been two months since I got the DESIGNER TOPAZ™ 50 to use for the summer. Two months! Before you know it, we’ll be talking about fall and holiday plans. But, right now, it’s my favorite season and I’m enjoying every second of it, even if it is so hot that I can feel my face melting every time I walk out of the house.
A couple weeks ago, I highlighted some of the features and capabilities of the DESIGNER TOPAZ™ 50, and today I’m going to show you the projects I made using it. I mentioned before that this particular sewing and embroidery machine is only two models up from one of my own machines (I have a DESIGNER TOPAZ™ 25), so it was immediately familiar to me. I was able to dive right in and while I did sew a handful of garments on this machine, the focus this time was really on showcasing the embroidery this machine can do. It is spectacular.
The ladies at my local dealer (hey, Linda and Karen!) were immensely helpful in walking me through some of the basics, and I invested countless hours into various tests of thread/needle/fabric combinations, while also experimenting with the design functions on the PREMIER+™ EXTRA software I have. Just like anything else, it just takes a little time and practice to get the hang of machine embroidery, but I also found that I was unnecessarily anxious about it. It’s so easy!
There are 150 embroidery designs that come with the machine, so you’ll have plenty to choose from the moment you unpack the machine. One of the designs is for a pair of earrings, which has got to be one of the coolest things I’ve ever seen. We all probably associate embroidery with some of the same things: tea towels, tote bags, t-shirts, etc., but this machine really opens up a lot of creative possibilities beyond the typical projects. Who would have thought about embroidering earrings?! The HUSQVARNA VIKING® folks, that’s who.
The earrings are made by embroidering on water soluble stabilizer and a piece of polyester organza (a tip I picked up from Linda at my dealer, and it really did make a difference). For the earrings you’ll need your choice of thread (I went with one solid color), stabilizer, earring hooks, hotfix crystals, and a hotfix applicator. I also found applique scissors to be the easiest for cutting the organza from the finished embroidery, but small, sharp scissors will work just as well.
My applique scissors. (Get a pair here.)
I used the small hoop that comes with the machine (the DESIGNER™ Splendid Square Hoop, 120 x 120), selected the design from the machine, and pressed the start button.
After you’ve embroidered the earrings and cut the organza away, soak them in warm water for about ten minutes to allow the stabilizer to dissolve, and then air dry. Once dry, apply the crystals and the earring post, and then you have yourself a brand new pair of adorable earrings. So much fun! Makes a great gift, too.
I had some intricate ideas for embroidered garments (still do, I’ll bring them to life eventually), but for this first project I decided to go with something a little more straightforward. One thing I didn’t want to do, however, was a simple, centered design. Not that there’s a thing wrong with that, but I kept going back to something with a more random, scattered placement that wasn’t a symmetrical design. I had high hopes for an embroidered wrap top, but I ended up going with an apron because it allowed me to go with a smaller design that I could embroider in sections. With the top, I kept running into overlapped embroidery or wonky placement, which was just a result of lack of practice. I didn’t want any of the embroidery to get into the seam allowances, but I also wanted it to follow the lines of the bodice. Because the front bodice piece was a little bigger than the hoop it needed to be embroidered in sections. The tricky part came in figuring out whether to do that in a top and bottom section or one big middle piece and two side areas. I tried both, but even with careful placement and measuring I couldn’t quite get the sections to work together without overlapping or creeping into the seam allowances.
Here you can see that the middle section of the embroidery has been applied, so I’m attempting to embroider the shoulder and side areas without overlapping what’s already there.
So, instead of a bigger design, I changed things up and designed a small cluster of three stars that I could embroider in various places. I will revisit the blouse idea later on, but the idea of a patriotic apron with stars on it was one I couldn’t pass up. So, I picked some denim from my fabric stash along with a red check cotton for the ties, and I got busy embroidering.
I traced the outline of the apron with tailor’s chalk, making sure to mark my seam allowances and pocket placement to avoid embroidering in those spots. I did a quick test run of the star cluster, and used that test piece to determine the placement of each little trio on the apron.
By simply rotating the design each time I embroidered it, I achieved the look I was going for: scattered placement that didn’t look repetitive or too intentional but was thoughtfully arranged. And each little cluster looks different, but it’s the exact same design. All I did was rotate it.
I thought it would be fun to embroider the pocket in a neat row of stars of the same size, so I decided how big I wanted them, designed and measured it to make sure it would fit the size of the pocket and follow its shape, and embroidered it in one go on the big hoop (the DESIGNER™ Royal Hoop, 360 x 200), and attached it to the apron. The apron is denim, and I used a size 80 titanium embroidery needle, black embroidery bobbin thread, and INSPIRA® Whisper Web Mesh Light Cut Away Stabilizer. Sulky embroidery thread. Worked like a charm.
I’m calling this apron “The All American” because if there was ever an apron deserving of that name, it’s this one. I love it!
These projects were so much fun I kick myself a little for not getting into embroidery sooner. Think of all the things that can be made now! I have big plans for an embroidered cropped jacket to go with this dress I made recently, and I’d like to do some fun embroidery (bees, maybe? or something cute like bananas or some kind of animal?) on a dress, so I’m looking forward to doing those things later this summer.
Happy Fourth of July! For me, this holiday is up there with Christmas. I love celebrating our nation, and I love everything patriotic and American during the summer. It reminds me of the summers my brother and I had when we were growing up. Biking to our neighborhood pool, sunny afternoons in the magical treehouse in our backyard, beach trips with our grandparents, church retreats, and running around with all of our friends. Most importantly, the freedom we had to do it all.
Ty and I are in the midst of our first house hunt. It’s exciting and frustrating and tons of fun and a huge pain and everything everyone always says about buying a home, but it’s also humbling in a way. I’m so thankful to live in a country where we have the freedom and opportunity to work hard and make a life for ourselves. I have always dreamed of living the life I live now, and it’s days like today that remind to take a moment and appreciate being an American and be thankful for the freedom to make choices for myself and live as fully and as heartily as I possibly can. Because, no matter what, I love my country and I’m proud to be an American.
Now, let’s see if I can whip up an apple pie.
I made my own patterns for a long time. I drafted and tweaked and tested…
Hello and Happy Wednesday! I’m so happy to be back with you in…