There are a few things you can always count on me to make on a regular basis: full skirts, fit and flare dresses, pretty blouses, and anything striped. Stripes are so charming and fun to work with, and the striped garments I make are some of my most worn items. (Which reminds me, I need to source some pretty striped shirting fabric. Ah, the endless fabric hunt!)
I designed a skirt a few years ago when I was in business out of sheer necessity. I had long envisioned a pleated, flared skirt with even, balanced stripes, but it’s no easy task bringing that idea to life without getting a little creative. Now, to be clear, there are easier ways to make something similar to the skirt in this post. You can use a printed stripe fabric, cut a rectangle out of it, and pleat it into a waistband or bodice. In fact, that’s an easy project for beginners, so that might be a great place to start. For me, I wanted a designed skirt with built in flare so that it didn’t fall flat from the waist, which is exactly what just cutting a rectangle will do. I also wanted to call the shots in terms of skirt length, stripe width, and overall design. So I made my own stripes, and today I’m showing you how to do the same thing. And the beauty of this concept is that it can be applied to any garment. So, in addition to my design, I will also be showing you a Butterick pattern I adjusted to make a striped pencil skirt.
Let’s go over a few things before we get started on the pattern:
So, here’s the front half circle skirt pattern. Remember that this is cut on the fold which is why we’re only looking at half of it.
Because the half circle is already pretty flared, we can jump right into adding the pleats. This skirt has three inverted box pleats in the front and two in the back, along with a knife or “side” pleat on either side of the zipper in center back. 6″ has been added to create the pleats, so you only need to add 3″ at center front (because it’s cut on the fold), and 6″ for the second pleat. The placement for the second pleat is roughly halfway between center front and the side seam.
You can see the gray paper I added to center front for the first pleat and the line I’ve drawn to mark the placement for the second pleat.
Cut the pattern along the line, completely separating it. Then, add 6″ for the pleat.
On the gray paper we just added, mark down the middle at 3″. This is where the pleat will meet after we’ve folded it. Remember that center front is cut on the fold, so we’ve only added 3″ there instead of 6″. So when you fold your paper it will only be half of the pleat. For reference, here’s a visual from my pattern making book that illustrates inverted box pleats very well:
Here you can see that I’ve folded the pleats in place and trued the waistline. Cut off the excess paper. Determine the length of your skirt and cut off excess paper at the hem.
After the pleats are added and folded and the waistline trued, your pattern will look something like this.
Now, we need to determine the width of the stripes. Once you know how wide you want the stripes, measure from the waistline down that amount. There’s your top stripe! Then, measure down the same amount from the line we just drew to create the second stripe and so on.
I’m pointing to the first stripe here:
Once you’ve drawn all of your stripes, cut each one and add seam allowance. This part takes paper, lots of tape, and an upbeat playlist to help get you through it! When each stripe has been separated and seam allowance added, the skirt will look like this, and remember to label each piece along with whether it’s a color stripe or white or print or what have you.
Repeat this process for the back skirt, putting the pleat roughly halfway between center back and the side seam. The original version of this skirt had a full box pleat at center back, but over time I decided it was a bit bulky, so now it’s just a knife pleat. You may add this or just have the one inverted box pleat in the back.
Cut the skirt on the crossgrain, and make sure to double notch at center back. This skirt is easy to make, but there are parts that are quite tedious, and cutting it out is definitely one of them. Remember that playlist I mentioned earlier? Yeah, you’ll want it again.
Navy stripes being cut:
White stripes being cut:
I like to line up my pieces in order and sew them together starting with the bottom piece. That way, when I get to the last stripe, it’s the shortest. I’m always happy to get to that last piece!
And here’s a trick to make sewing the front stripes together easier: start at center front instead of one side and sewing the length of the seam at once. I’ve found that starting at center front is much easier, and there’s never an issue lining the seams up. So, when you cut your front skirt stripes, notch at center front of each stripe piece so you can match it to the next stripe and so forth.
Here you can see the notches at center front I made when I cut out the front stripes. Starting from the top or bottom–wherever you want–match the stripe pieces at center front and sew together from center front to the side seam. Then, turn the pieces over and, starting at center front again, sew to the opposite side seam. This step isn’t necessary, it just makes things easier.
The next tip is important: serge the seams and press them as you go, not once the entire front or back piece is assembled. I press the seam allowances towards the color stripe, which goes against pressing rules, but I don’t like seeing the seam allowance through the white stripe.
Insert the pockets.
Be careful to match the stripe when you sew the side seams, but the rest of the skirt construction is easy and just like any other skirt. Attach the waistband, insert the zipper, drop in the lining, hem. Then, you’re done!
Once you’ve got the concept down, have a ball applying it to whatever you want. Tops, jackets, accessories, you name it. I’ve always wanted a striped pencil skirt, and I had an idea for an orange one because I knew it would pair beautifully with a blouse I made a couple months ago. And it does!
I added about 4″ to the length of this skirt, as well as a back vent and I widened the waistband and lined the skirt in Bemberg rayon. Tutorial for adding the back vent and how to sew it coming next week!
You know I like my makes to be as versatile as possible. You may not think that an orange stripe pencil skirt can be translated into a lot of different looks–the ceiling of versatility isn’t quite as high with this one as it is the others–but there’s still a number of things you can do with it. Go cute and casual:
Or, dress it up. More about this top here.
Lately, I’ve been putting bias tape or ribbon along the waistline seam of my skirts. It serves no practical purpose, but it sure does look pretty. I love navy and gold together, so I used gold bias tape in this skirt:
And I used an orange floral print quilting cotton to make bias tape for the orange skirt:
If you’re at all intimidated by this skirt, don’t be. It’s not complicated or difficult, just a little time consuming and tedious. But the result is so worth it!
As always, let me know if you need clarification on anything in this post. Have a wonderful weekend, and send me pictures of your striped projects!
Sewing is a skill. It takes time and lots and lots of practice to learn…
Endings are always bittersweet, and the big finale of this giveaway project is no exception…