I designed a dress a few years ago for a fall collection, and it was the most simple dress you can imagine. It wasn’t trendy or fussy, and other than two well placed pockets, there were no bells and whistles, because I’m a big believer that the bells and whistles aren’t always necessary. Sometimes, simple is enough.
The Millie dress was always popular, and it was in every collection I designed up until the very end. Like many other things I designed and sold at one point, I never managed to keep a Millie dress for myself. I wish I had, but the beauty of sewing is that nothing is ever really gone forever. And now, I finally have one of my own.
The Millie dress, over the years:
I actually made this dress last summer, but it’s only now making its debut. I was reminded of it recently when I used the remaining two yards of the fabric on a spring blouse, which you saw me wearing in Florida and in this post from last Friday. I got the fabric (cotton sateen) in early 2016 from Fashion Fabrics Club and, not surprisingly, it sold out pretty quickly. Fingers crossed they restock their sateen inventory soon!
Because the design is so simple, it’s important to get the fit just right. The bodice has front princess seams and a back dart, and there’s a very simple trick I use to get a closer, more flattering fit around the bust. (A lot of you commented on the fit of this dress, so here we go!)
You can apply this technique to self drafted patterns as well as commercial patterns, and you can also use this method to shape front bodice waist darts for a closer fit. For this tutorial, I’m using my own sloper to draft a front bodice with princess seams.
Essentially, what we’re doing here is taking out some fabric from under the bust and contouring that area to fit more closely to the body.
I’ve traced the front bodice and drafted a princess seam. Then, I mark on my dart legs 3″ up from the waistline, which is where I want the bodice to fit me better. Now, this is important: you will want to measure yourself because this particular measurement is different on everyone. For instance, if you’re short waisted, you may only need to measure about 2″ up from the waist and vice versa for you taller gals. When I first started doing this to my patterns, I tested it on a muslin to make sure I was taking in the right amount in the right place.
Next to the marks on the dart legs, I measure about 3/16″ into my bodice. Those of you with a bigger cup size may need to take more in here, and the reverse is true of smaller cups. Cup size aside, if there isn’t much difference in the bust measurement and directly below the bust, this adjustment may not be necessary at all.
Using a French curve, connect the waistline, marks under the bust we just drew, and princess seam lines. Your pattern will look something like this:
For reference, this is what a princess seam looks like just following the original dart leg, and one that has been shaped. You can see the difference that 3/16″ makes!
If you have any questions, let me know. I hope this helps you get a closer, more tailored looking fit on your spring projects. Happy Sewing!
Right off the bat, let me say the following: this dress is magical and I…
I made my own patterns for a long time. I drafted and tweaked and tested…